manualshive.com logo in svg

HP Chromebook 14-X0 SERIES, Maintenance And Service Manual, Page: 39 / 67

Share
Download
HP Chromebook 14-X0 SERIES Maintenance And Service Manual Download Page 39

Connector board

NOTE:

The connector board spare part kit includes a cable and double-sided adhesive.

Description

Spare part number

For use only on computer models equipped with WWAN capability (includes SD Card Reader slot and SIM
slot) for use on HP Chromebook 14 PC, and for use on HP Chromebook 14 G3

787715-001

For use only on computer models not equipped with WWAN capability (includes SD Card Reader slot) for
use on all computer models

787714-001

Before removing the connector board, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the keyboard/top cover (see 

Keyboard/top cover on page 25

).

Remove the connector board:

1.

Release the ZIF connector 

(1)

 to which the connector board ribbon cable is attached, and then

disconnect the connector board ribbon cable from the system board.

2.

Detach the connector board cable 

(2)

 from the battery. (The connector board cable is attached to the

battery with double-sided adhesive.)

3.

Remove the two Philllips PM1.9×2.4 broad head screws 

(3)

 that secure the connector board to the

base enclosure.

Component replacement procedures

33

Summary of Contents for Chromebook 14-X0 SERIES




































































Reviews:

No comments