manualshive.com logo in svg

HP Chromebook 14 G6, Maintenance And Service Manual

Share
Download
HP Chromebook 14 G6 Maintenance And Service Manual Download Page 19

Display components

Table 3-2

  Display component spare part information

Item

Component

Spare part number

(1)

Display bezel

L90416-001

(2)

Display hinge cover

L90414-001

(3)

Webcam module (includes double-sided adhesive)

L90439-001

(4)

Display bracket

L90417-001

(5)

Display panel:

 

14.0-in, FHD, antiglare, LED, UWVA, touchscreen display panel

L90429-001

 

14.0-in, FHD, antiglare, LED, UWVA, non-touchscreen display panel

L90428-001

 

14.0-in, HD, brightview, LED, SVA, touchscreen display panel

L90431-001

 

14.0-in, HD, antiglare, LED, SVA, non-touchscreen display panel

L90430-001

(6)

Display panel cable:

 

For use only on computers equipped with a touchscreen display assembly

L90419-001

 

For use only on computers equipped with a non-touchscreen display assembly

L90418-001

(7)

Webcam module cable (included in the Cable Kit, spare part number L90412-001)

(8)

Display hinges (2)

L90413-001

(9)

Display back cover (includes the wireless antenna cables and transceivers)

L90415-001

Display components

13

Summary of Contents for Chromebook 14 G6































































Reviews:

No comments

Brands by name

Popular brands

Load more brands