a.
Detach the display panel cable (1) from the display back cover. (The display panel cable is attached
to the display back cover with double-sided adhesive.)
b.
Release the display panel cable from the retention clips (2) and routing channel built into the
display back cover.
c.
Remove the display panel cable.
The display panel cable is available using the following spare part numbers, and includes double-
sided adhesive.
●
L14915-001 – For use only on computer models equipped with a touch display assembly
●
L14914-001 – For use only on computer models equipped with non-touch display assembly
14.
If it is necessary to replace the display hinges:
a.
Remove the four Phillips M2.5 × 4.0 screws (1) that secure the hinges to the bottom cover.
b.
Release the hinges (2) by sliding them toward the inside of the computer.
46
Chapter 5 Removal and replacement procedures for authorized service provider parts
