HP BL460c - ProLiant - G5, Maintenance And Service Manual

Page: 30 / 64

Removal and replacement procedures 30
7.
Remove the Smart Array E200i Controller cache module.
To replace the component, reverse the removal procedure.
HP Smart Array E200i Controller battery pack
To remove the component:
1.
Power down the server blade (on page 22 ).
2.
Remove the server blade (on page 22 ).
3.
Remove the access panel (" Access panel " on page 23 ).
4.
Remove all hard drives (" Hard drive " on page 24 ).
5.
Remove all hard drive blanks (" Hard drive blank " on page 23 ).
6.
Remove the hard drive backplane (" Hard drive backplane " on page 26 ).
7.
Remove the Smart Array E200i Controller cache module (" HP Smart Array E200i Controller cache
module " on page 29 ).