manualshive.com logo in svg

HP BL35p - ProLiant - 2 GB RAM, User Manual, Page: 28 / 95

Share
Download
HP BL35p - ProLiant - 2 GB RAM User Manual Download Page 28

 

Hardware options installation 28 

8.

 

Install the hard drive cage in the server blade. 

 

 

Dual Port Fibre Channel Adapter (2-GB) option 

Server blades can be configured for SAN connectivity when used with the following components. 

•

 

FC Adapter 

•

 

Supported p-Class server blades 

•

 

SAN-compatible interconnect 

•

 

SFP transceivers (included with the Dual Port FC Adapter) 

•

 

Optical FC cables (not included) 

•

 

Supported SAN and associated software 

For more detailed SAN configuration information for the server blade, refer to: 

•

 

The model-specific QuickSpecs document located on the HP ProLiant p-Class server blade products 

web page at the HP website (

http://www.hp.com/products/servers/proliant-bl/p-class/info

) 

•

 

The HP StorageWorks SAN documentation at the HP website 

(

http://h18006.www1.hp.com/products/storageworks/san/documentation.html

) 

•

 

The HP p-Class BladeSystem storage website (

http://www.hp.com/go/bladesystem/storage

) 

Summary of Contents for BL35p - ProLiant - 2 GB RAM
































































































Reviews:

No comments