manualshive.com logo in svg

HP BL35p - ProLiant - 2 GB RAM, User Manual, Page: 15 / 95

Share
Download
HP BL35p - ProLiant - 2 GB RAM User Manual Download Page 15

 

Setup 15 

 

Using the diagnostic station 

The diagnostic station provides a method to power up a server blade outside of a server blade enclosure 

for testing and diagnostic purposes. When using the HP ProLiant BL35p Server Blade with the diagnostic 

station, observe the following guidelines: 

•

 

The sleeve is required. 

•

 

The server blade must be installed in the top bay of the sleeve (or the left bay when the sleeve is 

lying on a flat surface). 

•

 

Only one server blade may be installed in the sleeve when connected to the diagnostic station. 

•

 

FC connections are not supported. 

•

 

The NIC 2 LED is not functional. 

For more information, refer to the

 

documentation that ships with the diagnostic station or refer to the HP 

website (

http://www.hp.com/products/servers/proliant-bl/p-class/info

). 

 

Installing a server blade 

  

CAUTION:

  To prevent damage to electrical components, properly ground the server blade before 

beginning any installation procedure. Improper grounding can cause ESD.  

  

CAUTION:

  To prevent improper cooling and thermal damage, do not operate the server blade enclosure 

unless all bays are populated with either a component or a blank.  

1.

 

Remove a 6U server blade blank. 

 

Summary of Contents for BL35p - ProLiant - 2 GB RAM
































































































Reviews:

No comments