Software and configuration utilities 128
For more information on the Embedded Diagnostics option, see the UEFI System Utilities user guide for
your server on the Hewlett Packard Enterprise website (
http://www.hpe.com/info/UEFI/docs
iLO RESTful API support for UEFI
The servers include support for a UEFI-compliant System BIOS, along with UEFI System Utilities and
Embedded UEFI Shell preboot environments.
S
ervers also support configuring the UEFI BIOS settings
using the iLO RESTful API, a management interface that server management tools can use to perform
configuration, inventory, and monitoring of a ProLiant server. The iLO RESTful API uses basic HTTPS
operations (GET, PUT, POST, DELETE, and PATCH) to submit or return JSON-formatted data with iLO
web server.
For more information about the iLO RESTful API and the RESTful Interface Tool, see the Hewlett Packard
Enterprise website (
http://www.hpe.com/info/restfulinterface/docs
Re-entering the server serial number and product ID
After you replace the system board, you must re-enter the server serial number and the product ID:
1.
During the server startup sequence, press the
F9
key to access UEFI System Utilities.
2.
Select
System Configuration
>
BIOS/Platform Configuration (RBSU)
>
Advanced Options
>
Advanced System ROM Options
>
Serial Number
, and then press the
Enter
key.
3.
Enter the serial number and press the
Enter
key.
The following message appears:
The serial number should only be modified by qualified service personnel.
This value should always match the serial number located on the chassis.
4.
To clear the warning, press the
Enter
key.
5.
Enter the serial number and press the
Enter
key.
6.
Select
Product ID
.
The following warning appears:
Warning: The Product ID should ONLY be modified by qualified service
personnel. This value should always match the Product ID located on the
chassis.
7.
Enter the product ID and press the
Enter
key.
8.
To confirm exiting System Utilities, press the
F10
key.
The server automatically reboots.
Utilities and features
HPE Smart Storage Administrator
The HPE SSA is a configuration and management tool for HPE Smart Array controllers. Starting with HPE
ProLiant Gen8 servers, HPE SSA replaces ACU with an enhanced GUI and additional configuration
features.
The HPE SSA exists in three interface formats: the HPE SSA GUI, the HPE SSA CLI, and HPE SSA
Scripting. Although all formats provide support for configuration tasks, some of the advanced tasks are
available in only one format.
Some HPE SSA features include the following:
•
Supports online array capacity expansion, logical drive extension, assignment of online spares, and
RAID or stripe size migration
Summary of Contents for BCDVideo BCD108
