Table 5-4
Computer Setup—Power (continued)
After AC Power
Failure
Allows you to select system restart behavior after power loss:
●
Stay Off
●
Power On
●
Auto
XD (Execute Disable)
Disables/enables the processor's XD feature.
Virtualization
Technology
Allows you to disable/enable Virtualization Technology.
S5 Maximum Power
Savings
Disables/enables S5 Maximum Power Savings. Enabling this feature reduces the power of this
system as much as possible in the S5 state. This feature must be disabled if you want to enable
Wake on LAN from S5.
WOL in S5
Disables/enables limited Wake on LAN from S5. Note that the computer can only wake from S5
during a normal shutdown event. The S5 Maximum Power Savings feature must be disabled in
order to enable limited Wake on LAN from S5.
Computer Setup—Boot
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 5-5
Computer Setup—Boot
Option
Description
Boot-time Diagnostic
Screen
Disables/enables POST diagnostic messages display.
Esc: Boot Menu
Disables/enables POST Esc: Boot Menu message display,
F9: Diagnostics
Disables/enables POST F9: Diagnostics message display,
F10: Setup
Disables/enables POST F10: Setup message display,
F11: Recovery
Disables/enables POST F11: Recovery message display,
F12: Boot From LAN
Disables/enables POST F12: Boot From LAN message display,
(Boot Device
Priority)
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
Allows you to specify which device groups will boot first, second, third, and fourth or to disable any
of the four:
●
CD-ROM Group
●
HDD Group
●
Floppy Group
●
Network Boot Group
NOTE:
MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system
has started.
Floppy Group Boot
Priority
Specifies boot device priority within removable devices.
54
Chapter 5 Computer Setup (F10) Utility
