1
dstIpOfRequest: The destination IP address of the interface on which an SNMP request is received and used as
the source IP address in SNMP replies.
Viewing SNMP notification configuration (CLI)
Syntax:
show snmp-server
Displays the currently configured notification settings for versions SNMPv1 and SNMPv2c traps, including SNMP
communities, trap receivers, link-change traps, and network security notifications.
Example:
In the following Example:, the
show snmp-server
command output shows that the switch has been configured
to send SNMP traps and notifications to management stations that belong to the "public," "red-team," and "blue-
team" communities.
Figure 28: Display of SNMP notification configuration
Hardware events and traps
Current default traps
The default event scenarios for currently generated traps on ArubaOS-Switches are:
• Device cold start notifications
• Device warm start notifications
• Port down notifications
• Port up notifications
Chapter 7 Configuring for Network Management Applications
207
