HP AA-RS2WC-TE, Installation Manual

Page: 108 / 242

Operating the Core Switch 2/64
108 Core Switch 2/64 V4.1 Installation Guide
■
Terminal serial port (also known as a console port)
■
The terminal serial port has an RS-232 signal subset connector that can be
used to connect to a PC serial port or dumb terminal.
■
Ethernet port - The Ethernet port has an RJ-45 connector and is capable of
speeds of 10/100 Mbps.
Table 10: Control Processor Card LED Patterns
Location
of LED
Purpose
of LED
Color of
LED
Status of
Hardware
Recommended
Action
Top LED Power No light
(LED is off)
CP card does not
have incoming
power.
Ensure CP card is
firmly seated and
has power.
Steady green CP card has
incoming power.
No action
required.
Second
LED
Status
No light
(LED is off)
CP card is either
healthy or does not
have incoming
power.
Verify Power LED
is lit.
Steady
yellow
CP card is faulty. Ensure CP card is
firmly seated. If
LED is still yellow,
consult switch
supplier.
Slow-flashing
yellow
(on 2 second;
off 2 second)
CP card is not seated
correctly or is faulty.
Pull unit out and
reseat. If LED
continues to
flash, replace
unit.
Fast-flashing
yellow
(on 1/2
second;
off 1/2
second)
Environmental range
exceeded.
Check for
out-of-bounds
environmental
condition.
!