40
Parameters
remote-host
: IP address or host name of a remote host, a case-insensitive string of 1 to 46 characters.
-i
interface-type interface-number
: Specifies the outbound interface for sending Telnet packets, where
interface-type interface-number
represents the interface type and number. If the destination address is a
link-local address, provide the
–i
interface-type interface-number
argument.
port-number
: TCP port number for the remote host to provide the Telnet service. It is in the range of 0 to
65535 and defaults to 23.
vpn-instance
vpn-instance-name
: Specifies the MPLS L3VPN that the remote system belongs to, where
vpn-instance-name
is a case-sensitive string of 1 to 31 characters.
Description
Use the
telnet ipv6
command to Telnet to a remote host in an IPv6 network. To terminate the current Telnet
connection, press
Ctrl+K
or use the
quit
command.
Examples
# Telnet to the remote host with the IPv6 address 5000::1.
<Sysname> telnet ipv6 5000::1
telnet server enable
Syntax
telnet server enable
undo telnet server enable
View
System view
Default level
3: Manage level
Parameters
None
Description
Use the
telnet server enable
command to enable the Telnet server.
Use the
undo
telnet server enable
command to disable the Telnet server.
The Telnet server is disabled by default.
Examples
# Enable the Telnet server.
<Sysname> system-view
[Sysname] telnet server enable
terminal type
Syntax
terminal type
{
ansi
|
vt100
}
undo terminal type
Summary of Contents for A7500 Series
Page 7: ...v Index 210 ...