37
•
9600 bps
•
19200 bps
•
38400 bps
•
57600 bps
•
115200 bps
The transmission rate varies with devices and configuration environment.
Description
Use the
speed
command to set the transmission rate on the user interface.
Use the
undo speed
command to restore the default transmission rate.
By default, the transmission rate is 9600 bps.
NOTE:
•
The command is only applicable to the asynchronous serial port (console port).
•
The transmission rate setting must be identical for the user interfaces of the connecting ports on the
device and the target terminal device for communication.
Examples
# Set the transmission rate on the AUX 0 user interface to 19200 bps.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] speed 19200
stopbits
Syntax
stopbits
{
1
|
1.5
|
2
}
undo stopbits
View
User interface view
Default level
2: System level
Parameters
1
: One stop bit.
1.5
: One and a half stop bits.
2
: Two stop bits.
Description
Use the
stopbits
command to set the number of stop bits transmitted per byte.
Use the
undo stopbits
command to restore the default.
By default, the stop bit is one.
Summary of Contents for A7500 Series
Page 7: ...v Index 210 ...
