19
command authorization
Syntax
command authorization
undo command authorization
View
User interface view
Default level
3: Manage level
Parameters
None
Description
Use the
command authorization
command to enable command authorization.
Use the
undo command authorization
command to restore the default.
By default, command authorization is disabled. Logged-in users can execute commands without
authorization.
With command authorization enabled, users can perform only commands authorized by the server.
Examples
# Enable command accounting for VTY 0 so that users logging in from VTY 0 can perform only the
commands authorized by the HWTACACS server.
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] command authorization
databits
Syntax
databits
{
5
|
6
|
7
|
8
}
undo databits
View
User interface view
Default level
2: System level
Parameters
5
: Sets 5 data bits for each character.
6
: Sets 6 data bits for each character.
7
: Sets 7 data bits for each character.
8
: Sets 8 data bits for each character.
Summary of Contents for A7500 Series
Page 7: ...v Index 210 ...
