18
# Use password authentication when users log in to the device through VTY 0, and set the authentication
password to
321
.
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] authentication-mode password
[Sysname-ui-vty0] set authentication password cipher 321
# Authenticate users by username and password for VTY 0. Set the username to
123
and the password
to
321
.
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] authentication-mode scheme
[Sysname-ui-vty0] quit
[Sysname] local-user 123
[Sysname-luser-123] password cipher 321
[Sysname-luser-123] service-type telnet
[Sysname-luser-123] authorization-attribute level 3
command accounting
Syntax
command accounting
undo command accounting
View
User interface view
Default level
3: Manage level
Parameters
None
Description
Use the
command accounting
command to enable command accounting.
Use the
undo command accounting
command to restore the default.
By default, command accounting is disabled. The accounting server does not record the commands that
users have executed.
When command accounting is enabled and command authorization is not, every executed command is
recorded on the HWTACACS server.
When both command accounting and command authorization are enabled, only the authorized and
executed commands are recorded on the HWTACACS server.
Examples
# Enable command accounting on VTY 0. Then the HWTACACS server records the commands executed
by users that have logged in through VTY 0.
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] command accounting
Summary of Contents for A7500 Series
Page 7: ...v Index 210 ...
