manualshive.com logo in svg

HP A7500 Series, Command Reference Manual

The HP A7500 Series Configuration Manual is a comprehensive resource for users looking to optimize the performance of their HP A7500 Series product. This manual can be easily downloaded for free from manualshive.com, providing step-by-step instructions and valuable insights for efficient configuration and enhanced functionality.

Share
Download
background image

 

15 

Parameters 

character

: Shortcut key for starting a terminal session, a single character (or its corresponding ASCII 

code value that ranges from 0 to 127) or a string of 1 to 3 characters. However, only the first character 

functions as the shortcut key. For example, if you input an ASCII code value of 97, the system uses its 
corresponding character 

a

 as the shortcut key. If you input string b@c, the system uses the first character 

b

 as the shortcut key. 

Description 

Use the activation-key command to define a shortcut key for starting a terminal session. 
Use the undo activation-key command to restore the default. 
By default, pressing the 

Enter 

key starts a terminal session. However, if a new shortcut key is defined with 

the 

activation-key 

command, the 

Enter

 key no longer functions. To display the shortcut key you have 

defined, use the 

display current-configuration | include activation-key

 command. 

 

 

NOTE:  

The 

activation-key

 command is not supported by the VTY user interface. 

 

Examples 

# Configure character 

s 

as the shortcut key for starting a terminal session on the console port. 

<Sysname> system-view 

[Sysname] user-interface aux 0 

[Sysname-ui-aux0] activation-key s 

To verify the configuration: 

•

 

Exit the terminal session on the console port. 

[Sysname-ui-aux0] return 

<Sysname> quit 

•

 

Log in to the console port again. The following message appears. 

****************************************************************************** 

* Copyright (c) 2010-2011 Hewlett-Packard Development Company, L.P.          * 

* Without the owner's prior written consent,                                 * 

* no decompiling or reverse-engineering shall be allowed.                    * 

****************************************************************************** 

 

User interface aux0 is available. 

 

 

 

Please press ENTER. 

                        

•

 

At this moment, pressing 

Enter

 does not start a session. To start the terminal session, enter 

s

. 

<Sysname> 

%Mar  2 18:40:27:981 2005 Sysname SHELL/5/LOGIN: Console login from aux0 

auto-execute command 

Syntax 

auto-execute command

 

command

 

Summary of Contents for A7500 Series































































































































































































































Reviews:

No comments

Related manuals for A7500 Series

Idem MPC Operating Instructions preview
MPC
Brand: Idem Pages: 2
S&C Omni-Rupter Installation Manual preview
Omni-Rupter
Brand: S&C Pages: 28
S&C Mark V Assembly And Installation Instructions Manual preview
Mark V
Brand: S&C Pages: 12
S&C Alduti-Rupter Instruction Sheet preview
Alduti-Rupter
Brand: S&C Pages: 24
S&C Alduti-Rupter Additional Instructions For Installation And Operation preview
Alduti-Rupter
Brand: S&C Pages: 24
S&C Vista SD Instruction Sheet preview
Vista SD
Brand: S&C Pages: 24
S&C Alduti-Rupter Installation Manual preview
Alduti-Rupter
Brand: S&C Pages: 28
S&C Vista SD Operation Manual preview
Vista SD
Brand: S&C Pages: 37
Belkin OmniView Secure F1DN102Uea Quick Installation Manual preview
OmniView Secure F1DN102Uea
Brand: Belkin Pages: 36
West Mountain Radio PWRguard PLUS Operating Manual preview
PWRguard PLUS
Brand: West Mountain Radio Pages: 10
A-Neuvideo ANI-H-KIT Instruction Manual preview
ANI-H-KIT
Brand: A-Neuvideo Pages: 28
Delta Electronics AGC764V1 Installation Manual preview
AGC764V1
Brand: Delta Electronics Pages: 31
LevelOne FSW-1640TX User Manual preview
FSW-1640TX
Brand: LevelOne Pages: 35
SMART-AVI MU-88 User Manual preview
MU-88
Brand: SMART-AVI Pages: 9
Byte Delight ZX-HD Manual preview
ZX-HD
Brand: Byte Delight Pages: 12
ANTIFERENCE Clear Switch CF-POE8 User Manual preview
Clear Switch CF-POE8
Brand: ANTIFERENCE Pages: 7
IN-COMMAND NCSTS9 Installation And Operation Manual preview
NCSTS9
Brand: IN-COMMAND Pages: 8
Myson Touch 2 WiFi Leaflet preview
Touch 2 WiFi
Brand: Myson Pages: 2

Brands by name

Popular brands

Load more brands