Configuration Commands
43
A6826A PCI-X Host Bus Adapter for Linux 64-bit Systems Installation Guide
edit_advanced_settings
Used to display and modify the advanced adapter settings. This parameter
produces the following sequence:
Advanced Adapter Settings:
Operation Mode:
0 - Interrupt for every I/O completion
5 - Interrupt when Interrupt Delay Timer expires
6 - Interrupt when Interrupt Delay Timer expires or no activity
Interrupt Delay Timer(100 ms)
Execution Throttle
Login Retry Count
Port Down Retry Count
Link Down Timeout(seconds)
LUNs per Target
Enable Extended Error Logging
Enable LIP Reset
Enable LIP Full Login
Enable Target Reset
edit_database
Used to display and modify entries in the WWN (world wide name) database
.
edit_efi
Used to display and modify the efi parameters. This command produces the
following sequence:
EFI parameters:
Enable Alternate Boot Device
Enable Boot Order List (disables Selective Login)
Enable Selective Logins
Enable Selective LUN Logins
Set Variable EFIFCScanLevel
