manualshive.com logo in svg

HP A5830 Series, Configuration Manual

The HP A5830 Series is a high-performance networking solution that empowers businesses to achieve seamless connectivity. With its intuitive user interface and advanced features, this product guarantees reliable and efficient network performance. Enhance your understanding of its configuration and settings by downloading the free, comprehensive manual from manualshive.com.

Share
Download
background image

 

92 

To do… 

Use the command… 

Remarks 

2.

 

Configure a free IP. 

dot1x free-ip

 ip-address 

{ 

mask-

address

 | 

mask-length 

}

 

Required. 
By default, no free IP is 
configured. 

 

When global MAC authentication or port security is enabled, the free IP does not take effect. 
If you use the free IP, guest VLAN, and Auth-Fail VLAN features together, make sure that the free IP 
segments are in both guest VLAN and Auth-Fail VLAN. Users can access only the free IP segments. 

Configuring the redirect URL 

To do… 

Use the command… 

Remarks 

1.

 

Enter system view. 

system-view 

— 

2.

 

Configure the redirect URL. 

dot1x url

 url-string

 

Required. 
By default, no redirect URL is 
configured. 

 

The redirect URL must be on the free IP subnet. 

Setting the EAD rule timer 

EAD fast deployment automatically creates an ACL rule, or an EAD rule, to open access to the redirect 

URL for each redirected user seeking to access the network. The EAD rule timer sets the lifetime of each 
ACL rule. When the timer expires or the user passes authentication, the rule is removed. If users fail to 

download EAD client or fail to pass authentication before the timer expires, they must reconnect to the 

network to access the free IP. 
To prevent ACL rule resources from being used up, you can shorten the timer when the number of EAD 
users is large.  
To set the EAD rule timer: 

To do… 

Use the command… 

Remarks 

1.

 

Enter system view. 

system-view 

— 

2.

 

Set the EAD rule timer. 

dot1x timer ead-timeout 

ead-

timeout-value

 

Optional. 
The default timer is 30 minutes. 

 

Displaying and maintaining EAD fast deployment 

To do… 

Use the command… 

Remarks 

Display 802.1X session 
information, statistics, or 
configuration information 

display dot1x

 [ 

sessions 

|

 statistics 

] [

 

interface 

interface-list

 ] [ 

|

 { 

begin

 | 

exclude

 | 

include

 } 

regular-expression

 ] 

Available in any view 

 

Summary of Contents for A5830 Series

























































































































































































































































































Reviews:

No comments

Related manuals for A5830 Series

Watchguard AP200 Setup Manual preview
AP200
Brand: Watchguard Pages: 40
Cabletron Systems Netlink FRX4000 Installation And Setup Manual preview
Netlink FRX4000
Brand: Cabletron Systems Pages: 8
Cabletron Systems 9C300-1 Upgrade Instructions preview
9C300-1
Brand: Cabletron Systems Pages: 4
Cabletron Systems MMAC-Plus 9F106-02 Reference Manual preview
MMAC-Plus 9F106-02
Brand: Cabletron Systems Pages: 7
H3C CR16006-F Configuration Examples preview
CR16006-F
Brand: H3C Pages: 21
Datasheen D902AC User Manual preview
D902AC
Brand: Datasheen Pages: 25
ADC HiGain HLU-231 List 8F Quick Installation preview
HiGain HLU-231 List 8F
Brand: ADC Pages: 7
Klark Teknik DN9650 Operator'S Manual preview
DN9650
Brand: Klark Teknik Pages: 50
H3C NSQ1GT48EA0 Manual preview
NSQ1GT48EA0
Brand: H3C Pages: 3
National Instruments NI-9206 Getting Started preview
NI-9206
Brand: National Instruments Pages: 8
Paradyne FrameSaver DSL 9788 Router Installation Instructions Manual preview
FrameSaver DSL 9788 Router
Brand: Paradyne Pages: 28
Sun Microsystems McDATA Eclipse 1620 Release Notes preview
McDATA Eclipse 1620
Brand: Sun Microsystems Pages: 9
Edimax GS-5208PLG V2 Quick Installation Manual preview
GS-5208PLG V2
Brand: Edimax Pages: 15
ACTi GNR-410 Quick Installation Manual preview
GNR-410
Brand: ACTi Pages: 12
Telit Wireless Solutions WE866C3 User Manual preview
WE866C3
Brand: Telit Wireless Solutions Pages: 37
National Instruments USB device 622x User Manual preview
USB device 622x
Brand: National Instruments Pages: 23
TRENDnet TS-U100 - NAS Server - USB User Manual preview
TS-U100 - NAS Server - USB
Brand: TRENDnet Pages: 47
NETGEAR WGR614DLNA Datasheet preview
WGR614DLNA
Brand: NETGEAR Pages: 2

Brands by name

Popular brands

Load more brands