HP A5120 EI Series Command Reference Manual Download Page 192

Page: 192 / 225

184

Table 43

Output description

Field

Description

DHCPv6 pool

DHCPv6 address pool number

Static bindings

Static prefix information configured in the address pool. If no static prefix is
configured, this field is not displayed.

DUID

Client DUID

IAID

Client IAID. If the IAID is not configured, this field displays "Not configured".

Prefix

IPv6 address prefix

preferred lifetime

Preferred lifetime of the prefix, in seconds

valid lifetime

Valid lifetime of the prefix, in seconds

Prefix Pool

Prefix pool referenced by the address pool. If no prefix pool is referenced, this
field is not displayed.

DNS server address

DNS server address. If no DNS server address is configured, this field is not
displayed.

Domain name

Domain name. If no domain name is configured, this field is not displayed.

SIP server address

SIP server address. If no SIP server address is configured, this field is not
displayed.

SIP server domain name

Domain name of the SIP server. If no domain name of the SIP server is
configured, this field is not displayed.

display ipv6 dhcp prefix-pool

Syntax

display ipv6 dhcp prefix-pool

[

prefix-pool-number

] [

{

begin

exclude

include

}

regular-expression

]

View

Any view

Default level

1: Monitor level

Parameters

prefix-pool-number

: Displays details about the prefix pool specified by the prefix pool number. The value

ranges from 1 to 128.. If no prefix pool number is specified, the brief information of all prefix pools is
displayed.

: Filters command output by specifying a regular expression. For more information about regular

expressions, see the

Fundamentals Configuration Guide

begin

: Displays the first line that matches the specified regular expression and all lines that follow.

exclude

: Displays all lines that do not match the specified regular expression.

include

: Displays all lines that match the specified regular expression.

regular-expression

: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Summary of Contents for A5120 EI Series


































































































































































































































Search results

Summary of Contents for A5120 EI Series

Reviews:

Brands by name

Popular brands

HP A5120 EI Series, Command Reference Manual

Search results

Summary of Contents for A5120 EI Series

Reviews:

Brands by name

Popular brands