HP A3100-16 v2 EI, Configuration Manual

Page: 45 / 193

Displaying and maintaining Ethernet link
aggregation
To do... Use the command... Remarks
Display information for an
aggregate interface or multiple
aggregate interfaces
display interface bridge-aggregation [ brief
[ down ] ] [ | { begin | exclude | include }
regular-expression ]
display interface bridge-aggregation
interface-number [ brief ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display the local system ID
display lacp system-id [ | { begin | exclude |
include
} regular-expression ]
Available in any view
Display the global
link-aggregation load-sharing
criteria
display link-aggregation load-sharing mode [ |
{ begin | exclude | include } regular-expression ] Available in any view
Display detailed link aggregation
information on link aggregation
member ports
display link-aggregation member-port
[ interface-list ] [ | { begin | exclude | include }
regular-expression ]
Available in any view
Display the summary of all
aggregation groups display link-aggregation summary [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display detailed information about
a specific or all aggregation
groups
display link-aggregation verbose
[ bridge-aggregation [ interface-number ] ] [ |
{ begin | exclude | include } regular-expression ]
Available in any view
Clear LACP statistics for a specific
or all link aggregation member
ports
reset lacp statistics [ interface interface-list ]
Available in user
view
Clear statistics for a specific or all
aggregate interfaces reset counters interface [ bridge-aggregation
[ interface-number ] ]
Available in user
view
Ethernet link aggregation configuration examples
NOTE:
In an aggregation group, only ports that have the same port attributes and class-two configurations
(see ”
Configuration classes ”) as the reference port (see “ Reference port ”) can operate as Selected ports.
You must ensure that all member ports have the same port attributes and class-two configurations as the
reference port. The other settings only need to be configured on the aggregate interface, not on the
member ports.
Layer 2 static aggregation configuration example
Network requirements
As shown in Figure 8 :
• Device A and Device B are connected through their respective Layer 2 Ethernet interfaces Ethernet
1/0/1 through Ethernet 1/0/3.
38