Verification
1.
The hosts and the server in VLAN 100 can ping one another successfully. The hosts and the server
in VLAN 200 can ping one another successfully. The hosts/server in VLAN 100 cannot ping the
hosts and the server in VLAN 200, and vice versa.
2.
Display protocol-based VLAN information on Device to determine whether the configurations have
become valid.
# Display protocol-based VLAN configuration on Device.
[Device-Ethernet1/0/2] display protocol-vlan vlan all
VLAN ID:100
Protocol Index Protocol Type
======================================================
1 ipv4
VLAN ID:200
Protocol Index Protocol Type
======================================================
1 ipv6
# Display protocol-based VLAN information on the ports of Device.
[Device-Ethernet1/0/2] display protocol-vlan interface all
Interface: Ethernet 1/0/1
VLAN ID Protocol Index Protocol Type
======================================================
100 1 ipv4
200 1 ipv6
Interface: Ethernet 1/0/2
VLAN ID Protocol Index Protocol Type
======================================================
100 1 ipv4
200 1 ipv6
Configuration guidelines
Protocol-based VLAN configuration applies only to hybrid ports.
Displaying and maintaining VLAN
To do...
Use the command…
Remarks
Display VLAN information
display
vlan
[
vlan-id1
[
to
vlan-id2
] |
all
|
dynamic
|
reserved
|
static
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view
Display VLAN interface
information
display interface vlan-interface
[
vlan-interface-id
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view
Display hybrid ports or trunk ports
on the device
display port
{
hybrid
|
trunk
} [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view
Display MAC address-to-VLAN
entries
display mac-vlan
{
all
|
dynamic
|
mac-address
mac-address
|
static
|
vlan
vlan-id
} [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view
112
