47
Figure 36
Dial the number
6.
Character string CONNECT9600 is displayed on the terminal. Then a prompt such as <HP>
appears when you press
Enter
.
Figure 37
Configuration page
7.
Execute commands to configure the device or check the running status of the device. To get help,
type
?
.
NOTE:
•
To terminate the connection between the PC and device, execute the
ATH
command on the terminal to
terminate the connection between the PC and modem. If you cannot execute the command on the
terminal, input AT+ + + and then press
Enter
. When you are prompted
OK
, execute the
ATH
command,
and the connection is terminated if
OK
is displayed. You can also terminal the connection between the
PC and device by clicking
on the hyper terminal window.
•
Do not close the hyper terminal directly. Otherwise, the remote modem may be always online, and you
will fail to dial in at the next time.
