68
hp photosmart 930 series user’s manual
NOTE
If your computer is running Windows XP, when you
turn on the camera in the next step, a dialog box will
display that requests you to
Select the program to
launch for this action
. Simply click on
Cancel
to close
this dialog box.
4
Turn on the camera. The HP Image Unload software will
launch on your computer. If you have set the software to
automatically unload the images in the camera, the images
will automatically unload to the computer. Otherwise, in the
Welcome
screen, click
Start Unload
. If there were any
images in the camera that were selected in the
Share
menu
for printing or e-mail, those actions are started after the
images have been unloaded to the computer.
5
When the unload screen on the computer says
Finished
,
your images have been saved and shared. You can now
disconnect the camera from the computer.
NOTE
To unload images to a computer that does not have the
HP Photo & Imaging software installed on it, change the
USB Configuration
setting to
Disk Drive
in the
Setup
menu.
See
on page 72. This allows the
camera to appear as another disk drive on the computer
so that you can easily copy the image files from the
camera to the hard drive of your computer.
Printing images
To print images that have been unloaded to the computer, you
can use the HP Photo & Imaging software that was shipped
with the camera.
You can also connect the camera directly to any HP Photosmart
printer or to any other HP printer with a front panel USB port,
then print images selected from the camera
Share
menu or all
images in the camera.
Summary of Contents for 930
Page 2: ......
Page 117: ......
Page 118: ...www hp com photosmart Printed in China 2003 Q2214 90154 Q2214 90154 ...
