HP 930, User Manual

Page: 17 / 118

Chapter 1: Getting started 17
Turning on power
Turn the camera on by sliding the
ON/OFF switch to the right and
then releasing it.
The lens extends, the Image Display
turns on, and the Power/Memory
light turns on solid.
Understanding the status screen
When you turn on the camera, the HP logo screen and then the
status screen display for a few seconds on the Image Display.
The main part of the status screen
shows the current focus, flash,
Resolution , and Compression
settings, as well as the battery level
and pictures remaining count. Any
non-default Capture menu settings
are also shown across the top of the
status screen.
The status screen is also displayed for a few seconds any time
you change the focus range, exposure mode, or flash settings
on the camera. (See Setting the focus range on page 30,
Setting the exposure mode on page 31, and Setting the flash
on page 33.)