MPN: A9950-96009
A9950-96009
1
Console Quick Start
Use this quick start guide for a system that is set up and ready to connect to a host console. This information
can also be found in your server installation guide and in the
HP Integrity and HP 9000 Integrated Lights-Out
Management Processor Operations Guide
.
To connect to a host console, use one or more of the following ports:
•
Console/Remote/UPS port (RS-232). Use this port to access the iLO MP through the console.
•
iLO MP LAN port. Use this port to access the iLO MP through the LAN.
•
VGA port. Use the port to access a graphics console. You cannot access the iLO MP using this port.
Physical Access
Figure 1 lists ports and required connection components.
Figure 1
Server Ports and Connection Components
IMPORTANT
Once you are physically connected, the next step is to configure the console. The following
sections provide high-level console configuration information. For detailed information on
configuring the console, see the server installation guide included with the server
documentation.
HP Integrity rx4640 and HP 9000 rp4410/4440
iLO MP LAN Port (10/100 LAN Cable)
VGA Port
EFI Only/No iLO MP Access
Console/Remote/UPS Port (RS-232)
(M Cable & RS-232 DB-9F to DB-9F)
