HP 8924E, Assembly

Page: 91 / 640

91
Chapter 2, Troubleshooting
More about Step 4 - Verify Test Set Functioning
N:\mkt\MANUALS\HP8924C\ALR\trouble.fb
CDMA Reference (A29) Unlocked
1. Verify that the rear-panel 10 MHz Oven Out signal is at 10 MHz, and at a level of
0 dBm ±3 dB into 50
Ω
.
2. Connect a BNC cable between the 10 MHz Oven Out and REF IN ports.
3. Press the SHIFT key, then press the TESTS key to access the CONFIGURE screen.
4. Set the
External Reference
field to
10.0000 MHz
(if not already set).
5. If the OOL indicator is lit on the CDMA Reference (A29) assembly, replace the
assembly and re-test.
.