HP 8924E, Assembly

Page: 292 / 640

292
Chapter 6, HP 8924E Performance Verification
CDMA Generator Duplex Out Amplitude Level Accuracy Performance Test 28
N:\mkt\MANUALS\HP8924C\ALR\24e_pt.fb
Procedure
1. Press the PRESET key on the Test Set.
2. Access the CONFIGURE screen, and change the
RF Display
field to
Freq
.
3. Set the
(Gen)-(Anl)
field to
0
.
4. Set the
Output Port
to
Dupl
.
5. Access
CDMA Call Control
screen.
6. Set RF GEN Freq to 840 MHz.
7. Access the CDMA CELLULAR MOBILE TRANSMITTER TEST screen.
8. Set the
Sector Power
field to the values listed in the PTR for Sector Power. See
"CDMA Generator Duplex Out Amplitude Level Accuracy Performance Test 28"
on page 400
.
9. Set the
Sector Power
field to
Off
.
10. Change the
Avg Power
measurement field to
Chan Power
(Channel Power).
11. Calibrate the Channel Power by selecting
Calibrate
in the
Power Meas
field.
12. Access the CDMA GENERATOR CONTROL screen.
13. Set the
AWGN Power
(Average Power) field to the values listed in the PTR for AWGN
Power.
14. Access the CDMA CELLULAR MOBILE TRANSMITTER TEST screen and read
Chan Power
and record it in the PTR.