HP 8200i, User Manual, Page: 84 / 136

8-2
Starting CD Copier
Starting CD Copier
Follow these steps to start CD Copier:
1. Start up your computer.
2. Insert a blank CD-R or CD-RW disc in the CD-Writer Plus. After a few
seconds a screen will appear which asks you to “Please select the type of
CD you wish to create.”
NOTE: If no screen appears after about 15 seconds, you may have inserted a
disc that is already formatted. Remove the disc and insert a blank disc. Or the
“Auto insert notification” option may be disabled (this applies to Windows 95
and Windows 98 only). To check this, click
Start , move the mouse pointer over
Settings, and click Control Panel . In Control Panel, double-click System and
select the Device Manager tab. Double-click the icon for the CD-Writer Plus,
then select the Settings tab. Click Auto insert notification if it does not have
a check mark next to it, and click OK . Click OK on the System Properties dialog
box. Then close the Control Panel.
Data CD Some CD-ROM drives may not be able to read a
DirectCD data disc. If you have a true MultiRead
CD-ROM drive, there should be no problems.
Mixed-Mode Mixed results. Some CDs copy perfectly; others do not,
possibly because the CD is formatted to circumvent
copying or because some CDs do not follow the
standard specifications.
Photo CD Requires a source CD-ROM drive that can read
CD-ROM XA. Most current drives support this.
Video CD Requires a source CD-ROM drive that can read
CD-ROM XA. Most current drives support this.
Type of CD Notes