![background image](http://html.mh-extra.com/html/hp/81101a/81101a_reference-manual_163946086.webp)
86
Programming Reference
SCPI Instrument Command List
Command
:TRIG:LEV
Long
:TRIGger:LEVel
Form
Set & Query
Parameter
Numeric
Parameter Suffix
V
with engineering prefixes.
*RST value
1.0 V
Specified Limits
–10 V to +10 V
Description
Use this command to program the triggering threshold of the CLK-IN
connector.
Example
To set the input impedance and the threshold of the CLK-IN connector:
Command
:TRIG:SLOP
Long
:TRIGger:SLOPe
Form
Set & Query
Parameter
POSitive | NEGative
*RST value
POS
Description
Use this command to select the trigger slope for the pulse period
triggering signal applied to the CLK-IN connector.
Command
:TRIG:SOUR
Long
:TRIGger:SOURce
Form
Set & Query
Parameter
IMMediate | INTernal[1] | INTernal2 | EXTernal2
*RST value
IMM
Description
Use this command to select the pulse period source of the HP81101A by
selecting the source of the pulse period trigger signal:
:TRIG:IMP 50OHM
:TRIG:LEV 2.5V
:TRIG:SOUR EXT2
Set CLK-IN impedance to 50
Ω
Set CLK-IN threshold to 2.5V
Pulse period trigger from CLK-IN