HP 81101A, Reference Manual, Page: 26 / 118

26
Programming Reference
HP 81101A SCPI Command Summary
HP 81101A SCPI Command Summary
Command Parameter Description
see
page
:ARM
(Trigger mode and source)
[:SEQuence[1] | :STARt]
[:LAYer[1]]
:EWIDTh
[:STATe]
ON|OFF|1|0 Set/read External Width mode 39
:FREQuency
<value> Set/read trigger frequency, when
PLL(INT2) used as source
39
:IMPedance
<value> Set/read impedance at EXT INPUT 40
:LEVel
<value> Set/read threshold level at EXT INPUT
40
:PERiod
<value> Set/read trigger period, when PLL(INT2)
used as source 41
:SENSe
EDGE|LEVel Set/read trigger on edge or gate on level
42
:SLOPe
POS|NEG|EITH Set/read trigger slope at EXT INPUT 42
:SOURce IMM|INT2|EXT|MAN Set/read trigger source
(VCO|PLL|EXT INPUT|MAN key) 43
:DISPlay
[:WINDow]
[:STATe]
ON|OFF|1|0 Set/read front panel display state
43
:MMEMory
:CATalog?
[A:] Read directory of memory card 44
:CDIRectory [<name>] Change directory on memory card 44
:COPY
<source>[,A:],<dest>[,A:] Copy a file on memory card 45
:DELete <name>[,A:] Delete a file from memory card 45
:INITialize
[A:[DOS]] Initialize memory card to DOS format 45
:LOAD
:STATe
<n>,<name> Load file from memory card to memory n 46
:STORe
:STATe
<n>,<name> Store memory n to memory card 46