HP 6400cl, Management Manual, Page: 103 / 664

GVRP
GVRP Operating Notes
■ Rebooting a switch on which a dynamic VLAN exists deletes that VLAN.
However, the dynamic VLAN re-appears after the reboot if GVRP is
enabled and the switch again receives advertisements for that VLAN
through a port configured to add dynamic VLANs.
■ By receiving advertisements from other devices running GVRP, the switch
learns of static VLANs on those other devices and dynamically (automat­
ically) creates tagged VLANs on the links to the advertising devices.
Similarly, the switch advertises its static VLANs to other GVRP-aware
devices, as well as the dynamic VLANs the switch has learned.
■ A GVRP-enabled switch does not advertise any GVRP-learned VLANs out
of the port(s) on which it originally learned of those VLANs.
■ While GVRP is enabled on the switch, you cannot apply any ACLs to
VLANs configured on the same switch.
■ A VLAN enabled for jumbo traffic cannot be used to create a dynamic
VLAN. A port belonging to a statically configured, jumbo-enabled VLAN
cannot join a dynamic VLAN.
3-19