HP 6200YL Reference Manual Download

Page: 722 / 765

■

vlan

VLAN-ID

ip ospf all area backbone

The backbone area (the same as 0.0.0.0).

backup

■

vlan

VLAN-ID

vrrp vrid

< 1 to 255 >

backup

Usage: vrrp vrid <VRID> backup

Description: Designate the virtual router instance as a Backup.

There is no default value.

binary-range

■

vlan

VLAN-ID

qos dscp

< 0 to 63 >

Specify the DSCP code-point in binary.

Range: < 0 to 63 >

blocked

■

vlan

VLAN-ID

ip igmp blocked

[ETHERNET] PORT-LIST

Usage: ip igmp blocked [ethernet] PORT-LIST

Description: Instruct the device to drop incoming multicast packets

received on the specified ports.

This feature is

configured on a per-VLAN basis.

■

vlan

VLAN-ID

ipv6 mld blocked

[ETHERNET] PORT-LIST

Usage: vlan < vid > ipv6 mld blocked < port-list >

Description: Instruct the device to drop incoming multicast packets

received on the specified ports.

This feature is

configured on a per-VLAN basis.

bootp-gateway

■

[no] vlan

VLAN-ID

ip bootp-gateway

Usage: [no] ip bootp-gateway [IP-ADDR]

Description: Add or remove the gateway address to be used for stamping

incoming DHCP requests.

This is a VLAN context command. It can be called directly

from the VLAN context or follow the 'vlan VLAN-ID'
command.

Next Available Option:

■

ip-addr

-- IPv4 address of the BOOTP gateway. (IP-ADDR)

(p. 729)

chain-name

■

vlan

VLAN-ID

ip ospf md5-auth-key-chain

CHAIN-NAME

Specify key chain to use for MD5 authentication.

720

2009 Hewlett-Packard Development Company, L.P.

vlan

Command Line Interface Reference Guide

Summary of Contents for 6200YL






























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands

HP 6200YL, Reference Manual

Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands