HP 6200YL Reference Manual Download

Page: 716 / 765

o dhcp-bootp - The switch attempts to get its configuration from a

DHCP/Bootp server.

o IP-ADDR/mask-LENGTH - Assign an IP address to the switch or VLAN.

The IP-ADDR/mask-LENGTH may be specified in two ways using the
following syntax:

ip address 192.32.36.87/24
ip address 192.32.36.87 255.255.255.0

Both of the statements above would have the same effect.
Multiple addresses may be configured on a single VLAN.

Next Available Options:

■

ip-addr

-- Interface IP address/mask. (IP-ADDR/mask-LENGTH)

(p. 729)

■

dhcp-bootp

-- Configure the interface to use DHCP/Bootp server to acquire parameters.

(p. 722)

■

[no] vlan

VLAN-ID

ipv6 address

Usage: [no] ipv6 address [dhcp|autoconfig|IPv6-ADDR/PREFIX-LEN]

Description: Set IPv6 parameters for communication within an IP network.

Each VLAN represents an IPv6 interface having its own unique
configuration.

The VLAN for which the configuration is

applied can be specified implicitly by preceding the
phrase 'ipv6 address' with the 'vlan VLAN-ID' keyword and
argument.

It can also be called explicitly when called

directly from a VLAN context.

In the latter case the

command affects the VLAN identified by the context.

Parameters:

o autoconfig - Enables automatic address configuration of IPv6

addresses using stateless configuration of an interface .

o dhcp - The switch attempts to get its configuration from a

DHCPv6 server.

o IPv6-ADDR/PREFIX-LEN-Assign an IPv6 address to the switch or VLAN.

The IPv6-ADDR/PREFIX-LEN may be specified in four ways using the
following syntax:

ipv6 address 1234:abcd::5678/40
ipv6 address 2001:0db8:1:1:ffff:ffff:ffff:fffe/64 anycast
ipv6 address 2001:0db8:0:1::/64 eui-64

Only link-local addreses are configured without PREFIX-LEN as below:

ipv6 address FE80:0:0:0:0123:0456:0789:0abc link-local

Multiple addresses may be configured on a single VLAN.

Next Available Options:

■

autoconfig

-- Automatic address configuration.

(p. 719)

■

dhcp

-- Configure a DHCPv6 client.

(p. 722)

■

ipv6-addr

-- Configure a link-local IPv6 address. (IPV6-ADDR)

(p. 731)

■

ipv6-addr/mask

-- Configure IPv6 address represented in CIDR notation.

(IPV6-ADDR/PREFIX-LEN)

(p. 732)

advert-address

■

vlan

VLAN-ID

ip irdp

< multicast | broadcast >

714

2009 Hewlett-Packard Development Company, L.P.

vlan

Command Line Interface Reference Guide

Summary of Contents for 6200YL






























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands

HP 6200YL, Reference Manual

Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands