HP 6200YL, Reference Manual

Page: 688 / 765

time
OVERVIEW
Switch Management Category:
config Primary context:
ip (page 290) Related Commands
sntp (page 634)
clock (page 86)
Usage: time [HH:MM:SS] [MM/DD[/[yy]yy]]
[daylight-time-rule <none|alaska|continental-us-and-canada|
middle-europe-and-portugal|
southern-hemisphere|
western-europe|user-defined>
[begin-date <MM/DD>] [end-date <MM/DD>]
[timezone <-720..840>]
Description: Display/set current time, date, and local time parameters.
Called without any parameters displays the information
mentioned above.
Parameters:
o HH:MM:SS - New time.
o MM/DD[/[yy]yy] - New date.
o timezone - The number of minutes your location is to the
West(-) or East(+) of GMT. Default is 0.
o daylight-time-rule - The daylight savings time rule for your location.
'none' (default) disables daylight savings time.
'begin-date' and 'end-date' are valid only if the
daylight time rule is set to 'user-defined'.
o begin-date - Set the beginning date for daylight savings time.
o end-date - Set the ending dates for daylight savings time.
Daylight savings time adjustment will be made at
2:00 AM on the first Sunday on or after the
specified date.
COMMAND STRUCTURE
■
time begin-date -- The begin date of daylight savings time (MM/DD) (p. 687)
■
time date -- New date (MM/DD[/[YY]YY]) (p. 687)
■
time daylight-time-rule < None | Alaska | Continental-US-and-Canada | ... > -- The daylight savings
time rule for your location (p. 687)
■
time end-date -- The end date of daylight savings time (MM/DD) (p. 687)
■
time time -- New time (HH:MM[:SS]) (p. 687)
■
time timezone < -720 to 840 > -- The number of minutes your location is West(-) or East(+) of
GMT (p. 687)
EXAMPLES
Example: time MM/DD[/[YY]YY]
Set the time on the switch to 9:45 a.m. on November 17, 2002:
ProCurve(config)# time 9:45 11/17/02
686 © 2009 Hewlett-Packard Development Company, L.P.