HP 6200YL Reference Manual Download

Page: 587 / 765

Usage: show ip rip redistribute

Description: List protocols which are being redistributed into RIP.

redundancy

■

show redundancy

Usage: show redundancy

Description: Display redundant information for Management and Fabric Modules.

remote-device

■

show lldp info remote-device

Show LLDP remote device information.

Next Available Option:

■

port-list

-- Show remote or local device information for the specified ports. ([ethernet]

PORT-LIST)

(p. 578)

resources

■

show access-list resources

Display ACL Rules/Masks availability.

■

show qos resources

Usage: show qos resources

Description: Show the qos resources.

■

show policy resources

Usage: show policy resources

Description: Show the policy resources.

resptime

■

show instrumentation resptime

Usage: show instrumentation resptime

Description: show service response time data for performance

sensitive operations registered for response time
measurement.

Next Available Option:

■

option

-- Filter response time metrics shown to those services whose name contains the

specified substring of up to 16 chars. (ASCII-STR)

(p. 574)

585

2009 Hewlett-Packard Development Company, L.P.

show

Command Line Interface Reference Guide

Summary of Contents for 6200YL






























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands

HP 6200YL, Reference Manual

Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands