HP 6200YL Reference Manual Download

Page: 357 / 765

Specify the ca-value string.

civic-addr

■

[no] lldp config

[ETHERNET] PORT-LIST

medPortLocation civic-addr

Usage: lldp config <port-list> medPortLocation civic-str <COUNTRY-STR>

Description: Specify the civic location-id information to be advertised.

The total length of the TLV is 104.
COUNTRY-STR : Set the Country Code of two characters.e.g. DE or US.
WHAT

: Set the 'what' number of range <0-2>.

0 - Location of DHCP server.
1 - Location of Switch.
2 - Location of Client.

CA-TYPE

: Set the ca-type of range <0-255>.

It is a repeatable parameter.ca-type should be unique.
ca-type sholud be followed by ca-value.

CA-VALUE

: Set the ca-value string.

Next Available Option:

■

COUNTRY

-- Specify the Country Code of two characters. (ASCII-STR)

(p. 356)

config

■

lldp config

[ETHERNET] PORT-LIST

Usage: [no] lldp config <PORT-LIST> <basicTlvEnable TLVMAP |

dot1TlvEnable vlan-name |
dot3TlvEnable

TLVMAP |

ipAddrEnable <IPV4-ADDR | IPV6-ADDR> |
medPortLocation ...

medTlvEnable

TLVMAP>

Description: Specify configurational parameters to the port.

Set basicTlvEnable with any one of the following TLV Maps.

port_descr

: Send Port Description TLV out this port.

system_name

: Send System Name TLV out this port.

system_descr

: Send System Descr TLV out this port.

system_cap

: Send Capability TLV out this port.

Set dot1TlvEnable with the following TLVs.

vlan_name

: Enable VLAN name TLV out the given port(s).

Set dot3TlvEnable with the following TLV Map.

macphy_config

: Send Mac Phy Config TLV out this port.

Set ipAddrEnable with the IP-ADDR to send out this port.
Set medPortLocation with location information for the port.

civic-addr

: Set civic address to send out this port.

elin-addr

: Set elin address to send out this port.

Set medTlvEnable with any one of the following TLV Maps.

capabilities

: Send Capability TLV out this port.This TLV has

to be enabled first to enable any MED TLV's.

network_policy : Send Network Policy TLV out this port.
location_id

: Send Location Id TLV out this port.

poe

: Send Med Poe TLV out this port.

355

2009 Hewlett-Packard Development Company, L.P.

lldp

Command Line Interface Reference Guide

Summary of Contents for 6200YL






























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands

HP 6200YL, Reference Manual

Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands