HP 6200YL Reference Manual Download Page 302

Page: 302 / 765

Usage: [no] ip igmp forcedfastleave [ethernet] PORT-LIST

Description: When enabled, this feature forces IGMP Fast Leaves to occur

even when the port is cascaded. See 'ip igmp fastleave' for
more information.

The default behavior is for IGMP Forced

FastLeaves to be disabled.
This feature is configured for ports on a per-VLAN basis.

forward

■

ip igmp forward

[ETHERNET] PORT-LIST

Usage: ip igmp forward [ethernet] PORT-LIST

Description: Instruct the device to forward incoming multicast packets

received on the specified ports.

This feature is

configured on a per-VLAN basis.

high-priority-forward

■

[no] ip igmp high-priority-forward

Usage: [no] ip igmp high-priority-forward

Description: Enable/disable the high priority forwarding of traffic for

subscribed IP Multicast groups. This feature is configured on
a per-VLAN

basis.

icmp

■

[no] ip icmp

Usage: [no] ip icmp [...]

Description: Configure ICMP Rate Limiting capacity. Use 'ip icmp ?' to get

a list of all possible configurable parameters.

Next Available Options:

■

addrmask

-- Enable/disable address mask replies

(p. 294)

■

burst-normal

< 0 to 1000000 > -- The maximum number of icmp replies to send per second

(p.

296)

■

echo

-- Enable/disable echo replies to broadcast echo requests

(p. 299)

■

redirects

-- Enable/disable redirect error messages

(p. 306)

■

reply-limit

-- Enable/disable ICMP reply rate limiting

(p. 306)

■

unreachable

-- Enable/disable destination unreachable error messages

(p. 312)

igmp

■

[no] ip igmp

Usage: [no] ip igmp [...]

Description: Enable/disable/configure IP Multicast Group Protocol (IGMP)

feature.

This command enables, disables or configures the

IGMP feature for IGMP communication between Multicast
Routers, Multicast Servers, and Multicast Clients connected
to the switch.

If not preceded by 'no', the command accepts

a variety of configuration parameters. To get a list of all

300

2009 Hewlett-Packard Development Company, L.P.

Command Line Interface Reference Guide

Summary of Contents for 6200YL






























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands

HP 6200YL, Reference Manual

Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands