581
network-operator
Parameters
name
prefix-list-name
: Specifies an IPv6 prefix list by its name, a case-sensitive string of 1 to 63
characters. Without this argument, this command displays statistics for all IPv6 prefix lists.
Examples
# Display the statistics for all IPv6 prefix lists.
<Sysname> display ipv6 prefix-list
Prefix-list6: 666
Permitted 0
Denied 0
index: 10 permit 6::/64 ge 66 le 88
Table 144
Command output
Field Description
Prefix-list6
Name of the IPv6 prefix list.
Permitted
Number of routes matching the criterion.
Denied
Number of routes not matching the criterion.
index
Index number of an item.
permit
Match mode of the item:
•
permit.
•
deny.
6::/64
IPv6 address and prefix length for matching.
ge
Greater-equal, the lower prefix length.
le
Less-equal, the upper prefix length.
Related commands
•
ipv6 prefix-list
•
reset ipv6 prefix-list
if-match ipv6
Use
if-match ipv6
to match IPv6 routes whose destination, next hop, or source matches the specified IPv6
prefix list.
Use
undo if-match ipv6
to remove the configuration.
Syntax
if-match ipv6
{
address
|
next-hop
|
route-source
} {
acl
acl6-number
|
prefix-list
prefix-list-name
undo if-match ipv6
{
address
|
next-hop
|
route-source
} [
acl
|
prefix-list
]
Default
No IPv6 prefix list match criterion is configured.
Views
Routing policy node view
