564
permit : 1
if-match cost 10
continue: next node 11
apply comm-list a delete
Table 142
Command output
Field Description
Route-policy Routing
policy
name.
permit
Match mode:
•
permit.
•
deny.
if-match Match
criterion.
continue
Specify the next node to be matched.
apply Action.
if-match as-path
Use
if-match
as-path
to match BGP routes whose AS_PATH attribute matches a specified AS path list.
Use
undo if-match as-path
to remove the configuration.
Syntax
if-match as-path
as-path-number
&<1-32>
undo if-match as-path
[
as-path-number
&<1-32>
]
Default
No match criterion is configured.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
as-path-number
&<1-32>: Specifies an AS path list by its number in the range of 1 to 256. &<1-32>
indicates that the argument before it can be entered up to 32 times.
Examples
# Define AS path list 2 to permit BGP routes containing AS number 200 or 300 to pass. Configure node
10 in
permit
mode for routing policy
test
to match AS path list 2.
<Sysname> system-view
[Sysname] ip as-path 2 permit _*200.*300
[Sysname] route-policy test permit node 10
[Sysname-route-policy-policy1-10] if-match as-path 2
Related commands
•
apply as-path
