429
allow-ibgp
: Allows redistribution of IBGP routes. This keyword is available when the
protocol
argument
is set to
bgp4+
.
cost
cost
: Specifies a metric for redistributed routes, in the range of 0 to 16. The default metric is 0.
route-policy
route-policy-name
: Specifies a routing policy by its name, a case-sensitive string of 1 to 63
characters.
Usage guidelines
The
import-route bgp4+
command redistributes only EBGP routes. The
import-route bgp4+ allow-ibgp
command redistributes both EBGP and IBGP routes.
Examples
# Redistribute routes from IPv6 IS-IS process 7 into RIPng and set the metric for redistributed routes to 7.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] import-route isisv6 7 cost 7
maximum load-balancing
Use
maximum load-balancing
to specify the maximum number of equal-cost multi-path (ECMP) routes for
load balancing.
Use
undo maximum load-balancing
to restore the default.
Syntax
maximum load-balancing
number
undo maximum load-balancing
Views
RIPng view
Predefined user roles
network-admin
Parameters
number
: Specifies the maximum number of ECMP routes. When this argument takes a value of 1, RIPng
does not perform load balancing.
Usage guidelines
The default maximum number of RIPng ECMP routes equals the maximum number of ECMP routes
supported by the system.
If you use the
max-ecmp-num
command to configure the maximum number of ECMP routes supported by
the system to
m
, the default setting of this command is
m
, and the value range for this command is 1 to
m
.
Examples
# Specify the maximum number of ECMP routes as 2.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] maximum load-balancing 2
