421
Number of trigger updates sent: 1
Table 100
Command output
Field Description
Public VPN-instance name/Private VPN-instance
name
Public network or VPN where the RIPng process runs.
RIPng process
RIPng process ID.
Preference
RIPng preference.
Checkzero
Indicates whether zero field check for RIPng packet
headers is enabled.
Default Cost
Default metric of redistributed routes.
Maximum number of balanced paths
Maximum number of load-balanced routes.
Update time
RIPng update interval, in seconds.
Timeout time
RIPng timeout interval, in seconds.
Suppress time
RIPng suppress interval, in seconds.
Garbage-Collect time
RIPng garbage collection interval, in seconds.
display ripng database
Use
display ripng
database
to display all active routes in the advertising database for a RIPng process.
RIPng advertises active routes in RIPng routing updates.
Syntax
display ripng
process-id
database
[
ipv6-address
prefix-length
]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id
: Specifies a RIPng process by its ID in the range of 1 to 65535.
ipv6-address
prefix-length
: Specifies an IPv6 address. The
ipv6-address
argument specifies an IPv6
address. The
prefix-length
argument specifies a prefix length in the range of 0 to 128.
Examples
# Display active routes for RIPng process 100.
<Sysname> display ripng 100 database
1::/64,
cost 0, RIPng-interface
10::/32,
cost 0, imported
2::2/128,
via FE80::20C:29FF:FE7A:E3E4, cost 1