manualshive.com logo in svg

HP 5800, Command Reference Manual, Page: 159 / 396

Share
Download
HP 5800 Command Reference Manual Download Page 159

 

150 

Field Description 

Modified 

Number of CR-LSP tunnels that use this device as the 
ingress and are in modified state. 

In-Progress 

Number of CR-LSP tunnels that use this device as the 
ingress and are in in-progress state. 

Failed 

Number of CR-LSP tunnels that use this device as the 
ingress and are in failed state. 

 

display mpls te tunnel-interface 

Description 

Use the 

display mpls te tunnel-interface

 command to display information about MPLS TE tunnel interfaces 

on this node. 

Syntax 

display mpls te tunnel-interface 

[

 tunnel 

number

 ] [ 

|

 { 

begin

 | 

exclude

 | 

include

 } 

regular-expression

 ] 

View 

Any view 

Default level 

1: Monitor level 

Parameters 

tunnel 

number

: Displays information about a specified tunnel interface. 

|

: Filters command output by specifying a regular expression. For more information about regular 

expressions, see the 

Fundamentals Configuration Guide.

 

begin

: Displays the first line that matches the specified regular expression and all lines that follow. 

exclude

: Displays all lines that do not match the specified regular expression. 

include

: Displays all lines that match the specified regular expression. 

regular-expression

: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters. 

Examples 

# Display information about MPLS TE tunnel interfaces on this node. 

<Sysname> display mpls te tunnel-interface 

  Tunnel Name         :  Tunnel0 

  Tunnel Desc         :  Tunnel Interface 

  Tunnel State Desc   :  CR-LSP is Up 

  Tunnel Attributes   : 

    LSP ID              :  1.1.1.9:1 

    Session ID          :  10 

    Admin State         :  UP                    Oper State   :  UP 

    Ingress LSR ID      :  1.1.1.9               Egress LSR ID:  2.2.2.9 

    Signaling Prot      :  CR LDP                Resv Style   :  - 

    Setup Priority      :  7                     Hold Priority:  7 

    Affinity Prop/Mask  :  0/0 

Summary of Contents for 5800













































































































































































































































































































































































































Reviews:

No comments