108
Examples
# Clear MPLS statistics for interface VLAN-interface 1.
<Sysname> reset mpls statistics interface vlan-interface 1
reset mpls statistics lsp
Description
Use the
reset mpls statistics lsp
command to clear MPLS statistics for the specified LSPs.
Related commands:
display mpls statistics lsp
.
Syntax
reset mpls statistics
lsp
{
index
|
all
|
name
lsp-name
}
View
User view
Default level
1: Monitor level
Parameters
index
: Specifies an LSP by its index number, which is ranging from 0 to 4,294,967,295.
all
: Specifies all LSPs.
name
lsp-name
: Specifies an LSP by the LSP name, which is a string of 1 to 15 characters.
Examples
# Clear MPLS statistics for LSP
lsp1
.
<Sysname> reset mpls statistics lsp lsp1
static-lsp egress
Description
Use the
static-lsp egress
command to configure a static LSP taking the current LSR as the egress.
Use the
undo static-lsp egress
command to remove a static LSP taking the current LSR as the egress.
Related commands:
display mpls static-lsp
,
static-lsp ingress
, and
static-lsp transit
.
Syntax
static-lsp egress
lsp-name
incoming-interface
interface-type interface-number
in-label
in-label
undo static-lsp
egress
lsp-name
View
System view
Default level
2: System level
Parameters
lsp-name
: Specifies the name for the LSP, which is a string of 1 to 15 characters.