HP 5400R zl2 Series, Nstallation And Getting Started Manual

Page: 68 / 140

3-4
Getting Started With Switch Configuration
Getti
ng Started Wit
h
Sw
itc
h
C
o
n
figu
ra
tion
Where to Go From Here
The above procedure configures your switch with a Manager password, IP
address, and subnet mask. As a result, with the proper network connections,
you can now manage the switch from a PC equipped with Telnet, a web
browser interface, or from an SNMP-based network management station
using a tool such as IMC.
Some basic information on managing your switch is included in the next
section. For more information on the console, web browser, and SNMP
management interfaces and all the features that can be configured on the
5400R zl2 switches, see the
Management and Configuration Guide which is
on the HP networking Web site.
To Recover from a Lost Manager Password: If you cannot start a con-
sole session at the manager level because of a lost Manager password, you
can clear all passwords and user names by getting physical access to the
switch and pressing and holding the Clear button for a full second.