HP 5400R zl2 Series, Nstallation And Getting Started Manual

Page: 21 / 140

1-11
Introducing the HP 5400R zl2 Switches
Front of the Switch
Introducing the HP 5400R zl2
Sw
itc
hes
Blinking
Orange
1
If Flash, Fault, and Self Test LEDs are blinking, Secure digital card failed self-test.
If Flash and Fault LEDs are blinking, an operational fault has occurred.
If fast blinking (400ms On and 400ms Off), an operational alert occurred and is unresolved
(for example, the Secure digital is not present).
Mgmt
(green/Orange)
On
Off
Blinking
Orange
1
A Management module is present and fault free.
The switch is powered off.
There is a fault on the Management module.
PoE
(green/Orange)
On
Off If any PoE modules are installed.
If no PoE modules are installed.
Slow
Blinking
Orange
1
Fast
Blinking
Orange
2
Internal PoE fault.
External load fault or denied PoE power.
Temp
(green/Orange)
Off Switch temperature is normal.
Blinking
Orange
1
An over temperature condition has been detected.
Fan
(green/Orange)
On The cooling fans are operating normally.
Blinking
Orange
1
One or more of the cooling fans have failed. The switch Fault LED will be blinking
simultaneously.
Internal Power
(green/Orange -
numbers
corresponding to
the power supply
positions) On A power supply is installed in the position in the back of the switch corresponding to the
number, and the supply is plugged in to an active AC power source.
Off A power supply is not installed in the position corresponding to the number.
Blinking
Orange
1
The power supply installed in the position corresponding to the number is not plugged
in to an active AC power source, or has experienced a fault. The switch Fault LED will
be blinking simultaneously.
System Reset
Button Single
press (0.2 -
5 seconds) Full chassis system is reset, without failover.
MM Shutdown/
Reset Button Single
press (0.2 -
5 seconds) Management Module shuts down. If a standby management module is present, failover
occurs. If there is no standby management module, the system reset occurs.
LEDs State Meaning