manualshive.com logo in svg

HP 5120 SI Series, Command Reference Manual

Share
Download
HP 5120 SI Series Command Reference Manual Download Page 33

22 

undo domain

 

isp-name 

View 

System view 

Default level 

3: Manage level 

Parameters 

isp-name

: ISP domain name, a case-insensitive string of 1 to 63 characters that contains no forward slash 

(/), backward slash (\), colon (:), asterisk (*), question mark (?), left bracket (<), right bracket (>), 

quotation marks ("), vertical bar (|), or at sign (@). 

Description 

Use the 

domain

 

isp-name 

command to create an ISP domain and enter ISP domain view.  

Use the 

undo domain

 command to remove an ISP domain.  

By default, there is a system predefined ISP domain named 

system

 in the system. 

All ISP domains are in the active state when they are created.  
The system predefined ISP domain 

system

 cannot be deleted; you can only modify its configuration.  

Related commands: 

state

 and 

display domain

. 

Examples 

# Create ISP domain 

test

, and enter ISP domain view.  

<Sysname> system-view 

[Sysname] domain test 

[Sysname-isp-test] 

domain default enable 

Syntax 

domain

 

default

 

enable

 isp-name

 

undo domain default enable 

View 

System view 

Default level 

3: Manage level 

Parameters 

isp-name

: Name of the ISP domain, a string of 1 to 24 characters. 

Description 

Use the 

domain default enable

 

command to specify the default ISP domain. Users without any domain 

name carried in the usernames are considered to be in the default domain. 
Use the 

undo domain default enable

 command to restore the default. 

By default, the default ISP domain is the system predefined ISP domain 

system

. 

There can be only one default ISP domain. 

Summary of Contents for 5120 SI Series












































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands