Table 30 Command output
Field Description
Restart Interval
Graceful Restart interval.
SA Bit Supported
The SA bit is set.
Total Number of Interfaces = 1
The current IS-IS interface number.
Restart Status
Graceful Restart status.
Number of LSPs Awaited
Number of LSPs not obtained by the GR restarter
from GR helpers during LSDB synchronization.
T3 Timer Status
Remaining time of T3 timer.
T2 Timer Status
Remaining time of T2 Timer.
display isis interface
Syntax
display
isis
interface
[
statistics
| [
interface-type interface-number
] [
verbose
] ] [
process-id
|
vpn-instance vpn-instance-name
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default level
1: Monitor level
Parameters
statistics
: Displays IS-IS interface statistics.
interface-type interface-number
: Specifies an interface by its type and number.
verbose
: Displays detailed IS-IS interface information.
process-id
: Displays the IS-IS interface information of the IS-IS process. The ID is in the range of 1 to
65535.
vpn-instance vpn-instance-name
: Displays the IS-IS interface information of the MPLS L3VPN.
vpn-instance-name
is a case-sensitive string of 1 to 31 characters. If no VPN is specified, the IS-IS
interface information of the public network is displayed.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use
display isis interface
to display IS-IS interface information.
Examples
# Display brief IS-IS interface information.
<Sysname> display isis interface
Interface information for ISIS(1)
134
