HP 3600 v2 Series Command Reference Manual Download

Page: 141 / 510

Use

undo circuit-cost

to restore the default.

By default, no global link cost is configured.

If no level is specified, the specified cost applies to both Level-1 and Level-2.

Related commands:

isis cost

and

cost-style

Examples

# Set the global Level-1 link cost of IS-IS process 1 to 11.

<Sysname> system-view

[Sysname] isis 1

[Sysname-isis-1] circuit-cost 11 level-1

cost-style

Syntax

cost-style

{

narrow

wide

wide-compatible

| {

compatible

narrow-compatible

}

[

relax-spf-limit

] }

undo cost-style

View

IS-IS view

Default level

2: System level

Parameters

narrow

: Receives and sends only narrow cost style packets (The narrow cost ranges from 0 to 63).

wide

: Receives and sends only wide cost style packets (The wide cost ranges from 0 to 16777215).

compatible

: Receives and sends both wide and narrow cost style packets.

narrow-compatible

: Receives both narrow and wide cost style packets, but sends only narrow cost

style packets.

wide-compatible

: Receives both narrow and wide cost style packets, but sends only wide cost style

packets.

relax-spf-limit

: Allows receiving routes with a cost greater than 1023. If this keyword is not specified,

any route with a cost bigger than 1023 will be discarded. This keyword is only available when

compatible

narrow-compatible

is included.

Description

Use

cost-style

to set a cost style.

Use

undo cost-style

to restore the default.

Only narrow cost style packets can be received and sent by default.

Related commands:

isis cost

and

circuit-cost

Examples

# Configure the router to send only narrow cost style packets, but receive both narrow and wide cost
style packets.

<Sysname> system-view

[Sysname] isis 1

[Sysname-isis-1] cost-style narrow-compatible

129

Summary of Contents for 3600 v2 Series































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3600 v2 Series

Reviews:

Related manuals for 3600 v2 Series

Brands by name

Popular brands

HP 3600 v2 Series, Command Reference Manual

Search results

Summary of Contents for 3600 v2 Series

Reviews:

Related manuals for 3600 v2 Series

Brands by name

Popular brands