HP 350 G1 Maintenance And Service Manual Download Page 27

Page: 27 / 159

Left side

Item

Component

Description

(1)

Power connector

Connects an AC adapter.

(2)

AC adapter/Battery light

●

White: The AC adapter is connected to external power and the battery is
fully charged.

●

Amber: The AC adapter is connected to external power and the battery
is charging.

●

Off: The AC adapter is not connected to external power.

(3)

Vent

Enables airflow to cool internal components.

NOTE:

The computer fan starts up automatically to cool internal components

and prevent overheating. It is normal for the internal fan to cycle on and off
during routine operation.

(4)

External monitor port

Connects an external VGA monitor or projector.

(5)

HDMI port

Connects an optional video or audio device, such as a high-definition television,
any compatible digital or audio component, or a high-speed HDMI device.

(6)

RJ-45 (network) jack

Connects a network cable.

●

Green (left): The network is connected.

●

Amber (right): The network is showing activity.

(7)

USB 3.0 ports

Each USB 3.0 port connects an optional USB device, such as a keyboard, mouse,
external drive, printer, scanner or USB hub.

Left side

Summary of Contents for 350 G1
































































































































































Search results

Summary of Contents for 350 G1

Reviews:

Related manuals for 350 G1

Brands by name

Popular brands

HP 350 G1, Maintenance And Service Manual

Search results

Summary of Contents for 350 G1

Reviews:

Related manuals for 350 G1

Brands by name

Popular brands