Basic Administrative Procedures and Setup Completion
35
NAS 2000s Administration Guide
Adding and Configuring NICs in a Team
Before a NIC is teamed, verify the following:
■
The NICs must be on the same network.
■
The NICs must be DHCP enabled and the DNS server address must be left blank.
Note:
The teaming utility becomes unstable if static IP addresses, subnets, and DNS addresses are
set before teaming.
■
Duplex and speed settings must be set to use the default values.
To team the NICs:
1. Open the HP Network Teaming utility. The Network Teaming and Configuration
Properties dialog box is displayed. The type of NIC and the slot and port used is shown.
Figure 12: HP Network Teaming Properties dialog box
2. Highlight the NICs to team.
3. Click the Team button. The Teaming Controls tab of the Properties dialog box is
displayed.
Summary of Contents for 345646-001 - StorageWorks NAS 2000s External Storage Server
