manualshive.com logo in svg

HP 345646-001 - StorageWorks NAS 2000s External Storage Server, Administration Manual

The HP 345646-001 StorageWorks NAS 2000s External Storage Server is a powerful storage solution equipped with advanced features. To help you navigate and manage its functionalities seamlessly, we provide a comprehensive Administration Manual. You can conveniently download this manual for free from our website, allowing you to maximize the potential of your storage server.

Share
Download
background image

Remote Access Methods and Monitoring

192

NAS 2000s Administration Guide

Enabling Telnet Server

Telnet Server can be enabled in two ways. The first is to use Remote Desktop to access a 
command line interface and enter the following command:

net start tlntsvr

The Telnet Server service needs to be enabled prior to running this command. The service can 
be enabled by opening the services MMC:

1. Select Start, Run, then type services.msc.

2. Locate the Telnet service, right-click on it, then select Properties.

3. In the startup type drop-down box, choose Manual, and click OK.

The second is to open the WebUI:

1. Click Network.

2. Click Telnet.

3. Check the Enable Telnet access to this appliance box.

4. Click OK.

Sessions Information

The sessions screen provides the ability to view or terminate active sessions.

HP Insight Manager Version 7

The NAS 2000s is equipped with the latest Insight Management Agents for Servers, allowing 
easy manageability of the server through HP System Management, HP OpenView, and Tivoli 
NetView.

Insight Manager is a comprehensive management tool that monitors and controls the operation 
of HP servers and clients. HP Insight Manager Version 7.0 or later is needed to successfully 
manage the NAS 2000s using the following components:

■

Windows-based console application available on the Insight Manager 7 CD-ROM loaded 
on a separate client for NAS devices

■

Server or client based management data collection agents

Management agents monitor over 1,000 management parameters. Key subsystems make 
health, configuration, and performance data available to the agent software. The agents act 
upon that data by initiating alarms in the event of faults. The agents also provide updated 
management information, such as network interface or storage subsystem performance 
statistics.

Summary of Contents for 345646-001 - StorageWorks NAS 2000s External Storage Server









































































































































































































Reviews:

No comments

Related manuals for 345646-001 - StorageWorks NAS 2000s External Storage Server

NEC Express5800/180Ra-7 Datasheet preview
Express5800/180Ra-7
Brand: NEC Pages: 2
NEC Express5800/120Rh-2 Getting Started Manual preview
Express5800/120Rh-2
Brand: NEC Pages: 2
NEC Express5800/120Rh-2 Datasheet preview
Express5800/120Rh-2
Brand: NEC Pages: 2
NEC Express5800/120Rg-1 Datasheet preview
Express5800/120Rg-1
Brand: NEC Pages: 2
NEC Express5800/120Rf-1 Operation Manual preview
Express5800/120Rf-1
Brand: NEC Pages: 21
NEC Express5800/120Ra-1 Release Note preview
Express5800/120Ra-1
Brand: NEC Pages: 6
NEC Express5800/120Mc2 series Datasheet preview
Express5800/120Mc2 series
Brand: NEC Pages: 2
NEC EXPRESS5800/120Le Configuration Manual preview
EXPRESS5800/120Le
Brand: NEC Pages: 56
NEC Express5800 320La Installation Notes preview
Express5800 320La
Brand: NEC Pages: 8
NEC Express5800 120Li Datasheet preview
Express5800 120Li
Brand: NEC Pages: 2
NEC Express5800 120Ed Installation Procedures Manual preview
Express5800 120Ed
Brand: NEC Pages: 29
NEC Active Upgrade Express5800/320Fc Datasheet preview
Active Upgrade Express5800/320Fc
Brand: NEC Pages: 4
NEC 320Fc Read Me First preview
320Fc
Brand: NEC Pages: 10
NEC Express5800/120Rj-2 Configuration Manual preview
Express5800/120Rj-2
Brand: NEC Pages: 18
NEC Express5800/120Rh-1 Configuration Manual preview
Express5800/120Rh-1
Brand: NEC Pages: 20
NEC Bull NovaScale R620 Series User Manual preview
Bull NovaScale R620 Series
Brand: NEC Pages: 346
NEC Express5800 320La User Manual preview
Express5800 320La
Brand: NEC Pages: 206
NEC Express5800/R110j-1 Manual preview
Express5800/R110j-1
Brand: NEC Pages: 30

Brands by name

Popular brands

Load more brands